PDA

View Full Version : no spark please help



knightrider
12-15-2005, 04:26 PM
hello i have a 1982 honda atc 200 its not get spark!everytime i put a new coil on it it will fire up and start and have spark and then it runs for a minute and cuts off and the has no spark again!now ive replaced the coil,cdi black box!and stll nothing!can someone please help me!:confused:

Unclediezel
12-15-2005, 04:32 PM
Check the Grounds at the coil mount-----You may find that your coils arent bad --But rahther messing with the bolts during installation is a problem--This is one of hondas pet problems--- Make sure the connections are clean and tight

:welcome: to the boards

knightrider
12-15-2005, 04:34 PM
i already cleaned them its grounded great

knightrider
12-15-2005, 04:38 PM
please help

Unclediezel
12-15-2005, 04:49 PM
:lol: Dont sound so sad------Its fixable----:lol:

If you havent already --Get a shop manual--thereis a guy here who has posted a bunch of them on his personal site----

Unclediezel
12-15-2005, 04:56 PM
http://deepa.recongamer.com/hondamanuals/index.html

In the manual there is a troubleshooting chart-- and a bunch of specs ---Also--make sure you are using the correct spark plug

knightrider
12-15-2005, 05:24 PM
iam already went there!its the right spark plug!

TeamGeek6
12-15-2005, 09:11 PM
Make sure to stick a new spark plug in when it quits to make sure its not losing spark from a fouled spark plug, then go looking for bad wiring. Dont waste any more money on parts till youve gone through the wiring.

Bigred200
12-15-2005, 09:42 PM
I dont know if it works like it does on cars but get it running and spray water on the wires if it sparks and quits running there your problem.