How to bypass kill switch?

[Mudder F er]

How can I bypass the kill switch on a 200x so I dont need to use one? Thanks

[TtownJoeShow]

No you don't need one, its just handy for turning the engine off.
first, take your sparkplug out and disconect the kill switch wires (just the ones for the kill) and crank the engine over (you want spark)...if that doesn't work then, you need to hard-wire the 2 wires together that are for your kill switch
most of the time it would b wired so the spark gets grounded before it goes to the CDI (off position), but in some it is the opposite

Now you haveto choke it to turn her off

[TeamGeek6]

Mine doesnt have one, but at least put a tether switch on it so that if you launch, itll kill the engine. Its dangerous to ride with no way to kill the engine. Those rear wheels can hurt you if it high sides. Been there, been hurt by that.

Look at the wiring diagram on the home page and find the wire colors to the switch.

That kill switch can be a source of lots of ignition problems.