250SX Maier Rear Fenders and Mudflaps ????

[ClayW]

Has anyone here bought and installed a set of the Maier rear fenders for a 250SX? If so, will the factory mudflaps bolt up and look right. Or do you need to buy the aftermarket ones that Maier makes for the SX. Thanks for the info in advance.


ClayW

[patblkwell]

Hey Clay, check this out: http://www.jlatvproducts.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=JLAP&Product_Code=48024

I think Maier's website used to have a picture of those mudflaps mounted on a fender..they must have taken it off for some reason.

[ScottZJ]

My SX has the factory mud flaps mounted on it fine.

http://www.fototime.com/{30C51A26-DCDF-4DAD-8626-D2008B87DA6C}/picture.JPG

[ClayW]

From the sounds of their description either would work either way. Humm. Thanks Pat.


Thanks Scott and John for the info. Scott, did they mount right up?

[patblkwell]

John, were the ones you got from Dennis Kirk made by Maier? I think those run for under $30 or so.

[ScottZJ]

Yeah they bolted up perfectly with no problems.
This is before.
http://www.fototime.com/{3098D7B5-41D9-4F20-B146-30750834356D}/picture.JPG

[patblkwell]

Oh ok gotcha...I had seen a picture of the maier ones on a fender before and they looked pretty good...maybe Clay will try them out if it comes down to it...I'd prob. give them a try and sell them if I didn't care for them.