View Full Version : Wider Wheels for 200x
firehart
01-25-2006, 09:17 PM
Do they make wider wheels or duals for a 200x?
Wayne H.
85 200x all stock
cragster
01-25-2006, 09:31 PM
Get '86 Hubs or 300ex/400ex hubs they make it wider
EDIT: you ment wider rims didnt you?!?
firehart
01-26-2006, 08:23 AM
Yes, I was thinking that might make it more stable on turns.
chris200x
01-26-2006, 08:30 AM
well you could get lower profile tires like 20x11x8 holeshots or similiar. Or a wider axle. Maybe some wheel spacers. but I would think just going with a wider tire you might run into some problems with the tire rubbing on the muffler.
TimSr
01-26-2006, 08:40 PM
Do they make wider wheels or duals for a 200x?
Wayne H.
85 200x all stock
Im going to assume you mean a wider stance rather than a wider rim, right?
Stock 200x rims dont have any offset. That means the part you bolt to is in the middle of the rim. Douglas, ITP and anybody else makes rims with an offset that are standard and you can gain a few inches per side. The 200x has the same standard 4/110 bolt pattern as a million other Hondas. The only problem is that it has short studs so you cant use thick OEM type rims. You can put other hubs on with longer studs such as from a 250x 300ex or 400ex and use any Honda rim. Ive found that used OEM aluminum rims from 300/400ex are pretty inexpensive but they are 9" instead of your stock 8" tires.
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.