View Full Version : 200s front on a atc 200
trikes4life
02-06-2006, 10:32 AM
Will a 200s front work on a atc 200 frame. Can i use the same axle houseing or no. I can get a front forks and axle housing and hub and new set of break pads for free and axle. Would i feel any difference with front suspension. I am worried that the tire would rub on the forks.
Lomax
02-06-2006, 11:06 AM
If you are changing the complete front end (axle and all) then it will bolt right up. My 83 200 has an 85 200s front end on it.
IrvSLedman
02-06-2006, 11:38 AM
It will work i have an 83 200 and an 85 200s BUT it wont steer quite right and you cannot fit the original 200 tire in those forks. I triked it My 200s tire is like a...25x12x9? i think and the 200s is like 22x11x9 or somthing i cannot remeber. all i know is that you will have to use the S tire, which is much smaller. and it looks goofy as all hell. but it will work.
sideshow_bob
02-06-2006, 05:47 PM
It will work,but as stated before it will look goofy.I personally like the nice wide front end..But then again thats just my opinion..
sideshow_bob
02-06-2006, 05:48 PM
You could always use a 200x front end.
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.