81-84 250r head swap

[Air-cooled-R]

Just a thought here, but since the air cooled 250Rs have the same head bole pattern as the blaster, would it be possible to put a water cooled head and radiator like the one on this blaster ?http://cgi.ebay.com/ebaymotors/Blaster-not-yfz-banshee-ex-cr_W0QQcmdZViewItemQQcategoryZ6725QQitemZ461118903 7QQrdZ1

Dont kno if that'd work, but if it did, that'd be pretty kool b/c my R motor does get pretty hot and that might would help..... Anybody kno more on that? kind of a dumb idea, but just a thought

[kloby]

Im not 100% on this, but i would not foresee a problem. :wondering

[MTS]

Pointless, The motor is deisgind as an Air-cool motor, thus With proper jetting it should have Good enough cooling. i have never herd nor seen of A/C 250r's over heating that are Jetted up to snuff.

[BIG*E*22188]

the water cooled aspect might still make it run better ....?

[willcamach]

if it worked maybe you could go with more aggresive porting without worrying about extra heat.

[Air-cooled-R]

mytrikesucks:
Pointless, The motor is deisgind as an Air-cool motor, thus With proper jetting it should have Good enough cooling. i have never herd nor seen of A/C 250r's over heating that are Jetted up to snuff.



well I've blown a top end and locked up a transmission b/c my motor overheated, but that was a few years ago. I have learned my lesson on lettin 'em rest, but i do kinda like this idea...............

[MTS]

mytrikesucks:
Pointless, The motor is deisgind as an Air-cool motor, thus With proper jetting it should have Good enough cooling. i have never herd nor seen of A/C 250r's over heating that are Jetted up to snuff.



well I've blown a top end and locked up a transmission b/c my motor overheated, but that was a few years ago. I have learned my lesson on lettin 'em rest, but i do kinda like this idea...............
Your motore overheated becuse you where not jetted properly.