Rode my 225DX for the 1st time today

[TRI-MOTO-MAN]

Well I put some new tires on the DX today and took it out of the garage and down the street for the 1st time. This was also my first ride on a 3 Wheeler!

I have a question about the clutch feel on this thing. This is my first experience with an auto clutch. How is it supposed to feel? I am used to a regular manual clutch on my CR125, but this seems like it is slipping.

Heres how it goes. I put it into 1st and gas it. Seems to move alright. Then when I shift into 2nd it seems like it revs a bit before it settles into gear. Is that normal?

There is an adjustment for clutch engagment, but I just wanted some info before I messed around with that.

Thanks

[edog]

There is a clutch adjustment screw on the side of the motor..Try that first.

[Yamahauler]

Your clutch sounds like its slipping a bit. The adjustment is real simple. on the right side case, undo the locknut, then turn the screw in until it lightly seats, then back it off an 1/8 turn. Tighten the locknut.

If it still slips, your friction plates may be worn.

[TRI-MOTO-MAN]

Thanks,

I'll try the clutch adjustment tommorow AM. Here's another thing, and I'm afraid it might open up a can of worms on the subject, but when I changed the oil I used Mobil1 synthetic. Now I have heard all the arguments for and against about slippage, but really could it happen.

My friend, who I trust, and is very knowegable with motocross bikes has always used Mobil1 in his gearbox. He has never had a problem with slippage.

[Yamahauler]

I THINK Mobil1 is safe with a wet clutch. But if your friend uses it, its likely ok. Just make sure its safe with wet clutches.