View Full Version : How am I supposed to take this caliper apart?
Tri-ZNate
02-11-2006, 08:56 PM
I'm trying to get to take the pistion out and rebuild the caliper but I see no way to get to it.
cracked junior
02-11-2006, 09:24 PM
is the bracket attached to the caliper. i would take that off. if you have a air compressor and a air gun. take the bleeder screw out, use compressed air to push it out.. use care so you dont destroy the piston. unless you have a new one
Tri-ZNate
02-11-2006, 09:35 PM
ok thanks john. It didnt look like the pics you mailed to me so I wanted to make sure.
And I was trying to break those #8 nuts loose to, to no avail infortunatly.
ATCnut
02-12-2006, 01:59 AM
You want to break loose the #8 bolts before you remove the calipar from the trike. It is very difficult to hold the calipar hard enough to get them off after it is removed. I would recommend putting the calipar back on the trike long enough to take the bolts out.
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.