another carb question-350x

[banned86]

thanks for the prior help with the jet. i now have another problem though. when i was taking the main jet out, a small brass bushing fell out from behind the main jet and on to the counter, and i have no idea which way it was in the carb.. it is the first bushing the needle runs through. i believe it is in the "needle set jet" on the following link: http://www.powersportspro.com/Partsfish/displayfiche.asp anyway i can describe this bushing as having a thin walled end, and a thicker walled end. when i place the bushing on the carburetor needle, thin end first, the bushing seats itself in the carburetor body and is visable from venturi. is this right?

i am having trouble with this carburetor. it is idling extreamly fast and i just wanted to make sure this is right before i adjust the idle screw.

help

thanks

mike

[SWIGIN]

link didnt work......sounds like the jet tube..is it threaded?

[banned86]

No it's not threaded.

[banned86]

its the small brass piece the needle slides through. the jets screw in on top of it if you are holding the carb in your hand bottom up.

[BigGreenMachine]

Checked the Partsfiche and it looks to be skinny side goes in first like you described.