Warrior Owners Help PlZ

[BigGreenMachine]

Looking for a couple measurements fellas. Need the rear caliper mount spacing, center to center of the bolt holes. As well as the rear resivor (spelling?) mount holes, center to center of the bolt holes. Also need the brake line length.

Help a guy out?

Trying to find some Raptor rear brakes for my Tecate but all I've found locally so far is Warrior brakes.

James

[BigGreenMachine]

Now come on, nobody wants to measure up the parts in question. It only took a second for me to do it on the T3.

[daputz]

If you don't get them today I can measure one at work on monday for you.

[BigGreenMachine]

Please do, no one seems to be doing it. Thank you sir!

[daputz]

nutz............I forgot to all the measurements, The mount on the brake bracket to the swingarm is 100mm center to center.

If you want I can get measurements from other machines as well, I work at a yamaha, suzuki, honda, bomb dealership. Lots of machines to see what will fit what:naughty:

[brapp]

most rear calipers are the same just the mounting plates are diffrent, i have a banshee caliper on my 350x, and a 400ex caliper on my 250r, it is all depends on the mounting bracket.

[BigGreenMachine]

I need a mounting bracket thats 2 and 3/4 inches from center to center of the bolt holes.

[MTS]

I need a mounting bracket thats 2 and 3/4 inches from center to center of the bolt holes.
Grab a piece of flat iron and make one....Measure it out drill a few holes.....then Paint! you can make pretty much any caliper work that way....Heck If you want REAL good breaks use a cbr600rr Front caliper....4 piston baby....:lol: