ATC250R swing arm Part numbers

[RideRed250R]

so... iam trying to order swing arm bearings and dust caps and all that... well i cross refrerence some numbers.... and iam confused... when i went to order them by part number they said it was TRX250R 85-87..... so is this right? by the way the bearings are pivot works... i need to know by tonight tho... as i need to have them here no later then friday.... cause stuff;s going to get very bussy... very fast....THANKS .... please get back
Adam

[nouseforaname90]

My guess is that the part number is right. Most of the early 250R TRX stuff interchanges with the 250R ATC stuff.

[Dads]

trx bearing 20x26x30 ------83/86 250r 22x29x24
trx cap 15x35x6 & seal 27x33x5------83/86 250r 15x32x5
trx collar 20x26x13 ------83/86250r 29x35x32
trx pin 15x20x64 ------83/86 250r 15x22x83


Did you try www.pivotworks.com,

[RideRed250R]

yah i watned the pivot KIT the whole dang thing... you said you could only get teh bearing..
Adam

[Aussieduner]

I ordered that Pivot Works kit(TRX250R 85-87) and it all fitted my 85 250r swinger when i rebuilt it.

Aussie

[Dads]

If the 86/87 TRX250r fit the ATC250r, I can get that kit for $36.41+ shipping

[Dads]

I just checked and the 81/82 250r take the same bearing as the 86/87TRX

[Xowner]

check in the classified there is a guy there selling the bushings kit that replaces all the metal parts and they WONT RUST!