View Full Version : no fire
tbird69
04-15-2006, 10:50 PM
hi
I have a honda 1983 200e that will not fire check wires ok how do you check the coil , ideals what else i can check.
thank you
b182tm
04-15-2006, 11:12 PM
Try chaniging the spark plug before you do anything else.
Erics350x
04-16-2006, 12:41 AM
Is it getting power from the stator? thats the most common part to go bad in honda ignitions.
tbird69
04-16-2006, 08:06 AM
hi
how do i check to see if i am getting power from the stator,
i try the spark plug on my tractor lanwmotor and i gave me fire when i ground it to
the engine,
thanks
Erics350x
04-16-2006, 08:08 AM
If you got fire with the other plug. Just pick up a new plug, problems solved.:)
tbird69
04-16-2006, 08:13 AM
i mean i took the spark from the 3 wheeler and try it on the tractor and got fire
so the plug must be
good or i would not of got fire thier either right.
thanks
traxxasx
04-16-2006, 08:24 AM
i mean i took the spark from the 3 wheeler and try it on the tractor and got fire
so the plug must be
good or i would not of got fire thier either right.
thanks
well the plug is good then, check other things, see where your loosing power..
scooterman
04-16-2006, 08:32 AM
Check The points or pickup coil. You may be able to file the points
Erics350x
04-16-2006, 08:41 AM
I agree prolly the points. I didnt realize it was that old, sorry.
Howdy
04-16-2006, 10:40 AM
200e doesn't have points. They have a CDI ignition.
How to check the stator? Do a search on the forums for exciter+coil. It has been covered lots of times.
Howdy
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.