Dodge motor guys please help

[Bender]

Will a 318 tranny bolt up to a 360 motor? If not is there some way i could make it work?

[200X Racer]

I believe it should, not positive though.

[darrel632]

torque flight 727 tranny -- exactly the same for both motors, different bell housing for the blocks. You should be able to use you old bell housing on a new tranny / torque converter with no issue

[Bender]

So i shouldnt have a problem then? Thanks guys!!!

[nate b]

318,360,340 are the same small block

[phreakboy]

Yes they will bolt up however, the 318 is an internally balanced motor and the 360 is externally balanced, so you would need to either use a 360 torque converter or buy from summit or another company a new flex plate for around $80 bux in order to balance the 360 properlly. If you dont your 360 will rattle to pieces.

[phreakboy]

This here is what you need B&M flex plate, part number 10236
http://store.summitracing.com/partdetail.asp?part=BMM%2D10236&N=400004+300189+115&autoview=sku