Warrior with YFZ Plastic! Pics Within!

[cragster]

Maier makes YFZ style replacement fenders for the warrior 350. I searched for over an hour and cant find any pics. I went on the Yfm350 site thing and found one but the links were dead. Can anyone here hook me up. I may just get a cheap warrior and upgrade the plastic

[cragster]

Maier makes YFZ style replacement fenders for the warrior 350. I searched for over an hour and cant find any pics. I went on the Yfm350 site thing and found one but the links were dead. Can anyone here hook me up. I may just get a cheap warrior and upgrade the plastic
Nevermind i found quite a few pics. but if you have anymore please post them.

[cragster]

Check it out a warrior with YFZ style plastic

[cragster]

And heres one with Blue YFZ remade plastics!

[cragster]

And one with just the front fender replaced...
I like the look of these warriors!

[willcamach]

if only that plastic could add some balls to the engine then it would be cool but when you get smoked by a 200x on that mean looking warrior you will only look dumber imo.

[cragster]

Lol. A 200x wouldnt smoke a warrior or raptor 350 would it. I have a 350x i should be able to kill my buddies rappy 350s i take it

[willcamach]

my 200x can do more than keep up with a 350 raptor i would assume a warrior would be about the same if not slower. but the plastics are cool looking on those warriors. gives them an updated look.

[scooterroo]

warrior and raptor 350 are the same bike just different plastic and a few updated items. i almost bought one till the dealer told me it was a warrior in new plastic basically. and yes i have seen warriors get beat by a 200x, so i think a 350x would walk away from a warrrior with no problem. warriors are way to heavy and the motor is too weak. i dust my buddies warrior with my 240 blaster all the time. i know its a totally different bike, 2 stroke versus four, but hey, my buddy definately hates it.

[cragster]

lol thats funny. Im thinkin about gettin a blaster maybe.

[cliff2302]

There is no way a 200x would beat a raptor unless it had some serious mods, get real guys.

[willcamach]

i am real and i have dusted a raptor 350 with my x and my x only has a bassani pipe and a k&n filter with no airbox lid. the 350 raptor has more top end but off the line is slow and if you can keep the revs up on the 200x motor it will leave a 350 raptor behind till you top out in 5th ive done it many times with my bud on his raptor and we are both fat asses and ride at about the same skill level.
now a 660 raptor is another story lol

[Yamahauler]

This post is pretty old but didnt someone see Warrior plastics on a tri-Z? If i remember right, it was a direct bolt. That would be a cool set of plastics for a Z!

[ride_red_95]

my 200x can do more than keep up with a 350 raptor i would assume a warrior would be about the same if not slower. but the plastics are cool looking on those warriors. gives them an updated look.

unless your 200x has some serious mods you couldn't keep up dude:crazy: :lol:

[willcamach]

well i dont want to argue over the internet but i have raced a raptor 350 and i swear to you that i had raptor on the hole shot and stayed out in front of him until i was flat out in 5th gear then the raptor slowly crept by me. happend numerous times with us switching off rides. i have a bassani pipe, k&n filter, and the motors has just been rebuilt with a wiseco 10.5/1 piston the raptor was completly stock and about 2 weeks old. those are the mods and that was the results point blank. believe it if you want call b.s if you dont. i dont care im sure my 250r and tri-z would smoke both the warrior/raptor/and my 200x lol

[chris200x]

This post is pretty old but didnt someone see Warrior plastics on a tri-Z? If i remember right, it was a direct bolt. That would be a cool set of plastics for a Z!

This what you talkin bout? :naughty:

http://www.3wheelerworldforums.com/showthread.php?t=50966&highlight=tri+guys

Oh and to add to this arguement I've owned a warrior and a honda 250sx at the same time and guess what... the sx kept up with the warrior quite well. The quad always won by a bike legnth or two but I was suprised that the sx stayed right with it every time. ;) So I think It would be safe to say a 200x could/would give it a run for his money! :eek:

[twgranger]

warrior and raptor 350 are the same bike just different plastic and a few updated items. i almost bought one till the dealer told me it was a warrior in new plastic basically. and yes i have seen warriors get beat by a 200x, so i think a 350x would walk away from a warrrior with no problem. warriors are way to heavy and the motor is too weak. i dust my buddies warrior with my 240 blaster all the time. i know its a totally different bike, 2 stroke versus four, but hey, my buddy definately hates it.
I thought they changed the motor in the raptor 350.:wondering

[diggerzmound]

They made some very subtle changes in the Raptor motor. For some reason they changed the cam beaing. The carb is not the same, besides thsoe two there is very little different.

I bet your 200x wouldn't smoke my warrior.(and my daddy is bigger then yours)
My brother has a 200x with a supertrapp pipe, and big carb, and its no match for the warrior. The only thing it has is weight advantage..

[willcamach]

well im not into internet racing but. i know what my x can do.

[86tri-z270]

my 200x can do more than keep up with a 350 raptor i would assume a warrior would be about the same if not slower. but the plastics are cool looking on those warriors. gives them an updated look.

actually... warriors are nothing close to the 06 350.... they have balls... the new carb and crank setup for it really helps worlds my uncle has on bone stock.... and weve races some stuff.... and the 350 (being a 6 speed) will keep up with a 02 660 (5 speed) considering the extra gear and rider weight... now warriors.... not a snowballs chance in hell that they can keep up...

[86tri-z270]

I thought they changed the motor in the raptor 350.:wondering
they did

they come stock with new shorter stroke rod and crank.... bigger carb with a stock (but aftermarket) jetkit and lightened it 40 some odd pounds (thats from the 05-06 models) my uncle has both... dont argue this.... the 05 with a pipe wiseco piston and a lil other work BARELY keeps with the 06

[400exXx]

I think it looks kinda goofy, id rather aftermarket fenders.

[cragster]

it is aftermarket fenders from maier to make it look YFZ ish

[hrc85250r]

the 200x was a performance minded machine whereas the warrior and/or raptor 350 is billed as a "novice" sport machine, now ive never seen the two machines race, but because of power to weight ratio and the fact that the 200x is more performance minded i would say that the 200x has a damn good chance of smoking that heavy-ass POS yamaha and i would put 10$ on the fact that a fresh 200x motor puts out within 5 or less HP than a warrior or raptor 350 does. also i bet that raptor 350 beat the warrior because that warrior your uncle raced probly has 500 hours on it and its probly from the early 90's! my fresh 250r motor smokes the hell out of my other older one, and its not just the topend its the tranny too, a worn tranny can slow a machine down ALOT. basically what it comes down to is HONDA POWER, naturally.

[01400ex]

And heres one with Blue YFZ remade plastics!

thats my old quad!!lol:cool: