Redkote Quick Question

[atcmatt]

I have just done one coat on my bigreds tank of this redkote stuff, it is a brand new plastic tank but i have put this stuff in so it does not peel the stickers off the side, due to permeating gas..How many coats of this stuff do you guys recommend?

Thanks

Matt

[scooterroo]

i would like to know as well for i am getting ready to coat my tecate tank.

[davbrink]

I've done two tanks recently. I found that about 1/2 quart did 1 tank. I used it pretty heavy. I poured it in and rolled it around all day (every 1/2 hour or so). You can do as I did and "prop" it up into different positions to "dry". Pull all your filters,petcocks and anything else. Then cover the holes with tape while you roll it. It take about a week for it to dry if you go as thick as I do but it is only 1 coat. Pour the excess out at the end of the first day. Just my opinion. Good luck!

[seadoo650]

I also did about a half quart for a 200x tank. Same as davbrink said. When it was all coated I used an air nozzle on the top with my hand to blow the excess out of the petcock hole on the bottom. Stuff works great.

[Pete]

where can you get it? I used Kreem on my ATC 110 tank, which worked ok, but it sounds like this stuff works better...

[atcmatt]

Seems good so far. Looks to be exactly the same as PVC plumbers glue.

Matt

[JackFlack]

I thought it said not to use on plastic tanks ???

[wheelie king]

Do an ebay search for "red kote gas tank coatings". There is a seller called harleysandvws that I got mine from. All sellers do it for about 28-30 bucks a quart. The stuff is amazing.

Good luck.