What feeler guages do you guys use

[dufrain]

What feeler guages do you guys use to adjust valves.My Lisle brand ones for cars and trucks wont fit in there.Im trying to avoid spending 25-30 for the motion pro ones.I would like to get one at a local parts store to avoid shipping on a tiny item.Thanx

[Howdy]

I bought a set of flat feeler guages ( Under $8.00 or so ). I then bent the ones I was going to use for adjusting valves to fit into area.
Howdy

[dufrain]

What brand did you get that had the .003-.005 that some engines call for,thanx for the reply ,I will be bending some,I dont know why I didnt just do that.My feeler set just goes down to about .008 lowest.

[dgould]

I just bend mine also, they will still close and flatten back out. Some auto parts stores sell individual ones real cheap.
Have a good day and ride safe.

[ATCnut]

http://www.3wheelerworldforums.com/attachment.php?attachmentid=15046&d=1124335709

I picked a couple of these up at the moto shop. They work just right

[Unclediezel]

Lisle , K+D, S+K, -----Anything in a blister-Pak will usually say on the package what it includes. If it gets real desperate-- The OLD MAN in the corner house probably has 2 or 3 of them laying on the garage floor. Whichever you choose---Dont spend more than 10 or 12 bucks at most.