pics of the tri-z project

[firecat]

Heres a couple pics of my tri-z when i got it she was bad .I tore it down and painted everything.its going back together slowly. trying to get the parts i need off e-bay when i can. I recovered the seat. it only cost me ten bucks for the material. I need some back rims bad so atleast it will be a roller:Bounce then ill get some razrs for it .the motors gonna need a cylinder . i think its junk .just put in new carrier bearings and sealsnow shes nice and tight id like to get it done by fall . ill post more pics as it comes together.:w00t:anybody have acarb they want sell let me know.

[Louis Mielke]

not bad looking. keep up the good work

[jason 32]

:beer have the cylinder sleeved
call -dirt cycle salvage-1-508-478-5700 ask for dave,he is pretty good on prices
and im bettin hes prob got one
rims too,but dennis kirk has some steel rims new for 26.00
dk--1-800-969-7601

i know what you mean about wanting it done !!
im still waiting on cases for my 200x:mad: i want to finish it ,and head to st joes before november

[firecat]

the skirt on the sleeve broke and it gouged the jug behind it im not sure if it can be cleaned up or not.. heres a pic of it.

[MIK6]

firecat... You are close to a ATV salvage yard!! I bet less than 10 mins from you. If you want to PM me I can give you my # and his # to get you up and running.
I have trails to the railroad tracks all the way to you from here in Oswego!

MIK6 / Mike

[03 ORANGE SHEE]

better hurry up and get one, soemones making a trip up there and picking all tri-z stuff up before it goes on EGAY!

[86tri-z270]

mik6 your from oswego.... wow do you happen to know anyone by the name tony or lauren gambino?

[Yamaha Tri-Moto]

Thats looking real good. Keep us posted, looking forward to seeing it done.

[jason 32]

well the piston doesnt use the alluminum sleeve after it has been sleeved
it has a gasket to seal the base is it ok??
and the bolts hold it in place
some big bores are opened almost all the way up
i dont see why it could'nt be used
i would do a big bore,and port it
-it is alluminum,and could be built up with weld ,also if your sceptical,i wouldnt throw it away

[firecat]

painted the airbox cover and had a local guy make me some graphics. starting to look better . now i need a cylinder , carb , rad shrouds , kicker and my back rims should be here this week so im gonna put on the razrs. what front tire should i go with i think the stock size is rare or something and you dont get much to choose from? any suggestins wold be appreciated.latta:Bounce