View Full Version : 84 200x slips in third
trikes4life
09-06-2006, 07:50 PM
i have been working on a friends 200x, and it slips in third gear. Whats needs work.
Kintore
09-06-2006, 07:54 PM
Normally its the clutch that makes it slip, only does it in 3rd?
Does it rev up then suddenly catch and pull? any other gear?
Billy Golightly
09-06-2006, 08:19 PM
i have been working on a friends 200x, and it slips in third gear. Whats needs work.
Only 3rd gear? Don't run it anymore or it'll end up like this.
That looks fine.Little fileing and some duck tape and it will be good to go.
triker111
09-06-2006, 08:34 PM
hmm thats odd wish i could help
traxxasx
09-06-2006, 09:05 PM
probably he did a nice burn out in 3rd and burnet the clutch plate for 3rd so i would look into the clutch basket and check out the clutch plates/fiber plates.
trikes4life
09-08-2006, 09:46 PM
Normally its the clutch that makes it slip, only does it in 3rd?
Does it rev up then suddenly catch and pull? any other gear?
engine never misses a beat, it just slips than catches, slips-catches, in only third. Eveything else is good.
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.