atc 120

[team-red-rider]

ok i got the lifan engine for my 110 and i need some help with the rear mounting hole it dosent line up i also need help with the wiring of the stator only no lights. so tell me what u think here are some pix(the one without fenders is the old 110r which is in dire need of help i hit a rock and broke the clutch side case lol):pics: :pics: :pics: :pics:

[team-red-rider]

what is this exaust i was told it was a bassani by 2 people (the guy who gave it to me and a guy at an mc shop)or are(am) i /they :crazy:

[3bogger]

im not familier with the motor you put in there (kinda new to 3 wheelers) is it supost to line up? mabey if you posted some pictures that showed the mounting hole close up. how far off is it?

[Vealmonkey]

I think you will find it is easier to line up the rear hole and redrill the front, but either way you will have to drill new holes. I'm not sure of the wiring of your engine, but, on ebay they sell wiring diagrams. Your engine should have come with a coil and other electrical parts, those you will have to use with the new engine. I believe the new engine is 12 volt and if your run your lights you will have to switch over to 12 volt bulbs. Good luck with your project.

[team-red-rider]

also i need help with the axle whats an axle that would fit thats good for flattrack