Tri-Z swingarm and skid plate interchanges?

[GoodKarma]

Sorry for the silly question, but I would have sworn that I read somewhere that the Blaster swingarm and skid plate were interchangable with the Tri-Z. Am I loosing my mind? If there are interchanged parts, is it a specific year?

Okay, enough stupid questions for one night!:beer

[TRI-Zbrian]

the blaster sprocket guard will bolt up.... but im not sure about being able to use the whole swing arm from a blaster.... if you do a search i have an article that has everything that will swap from other bikes.... well most things... i made it last year so it def needs to be updated...

here you are...

http://www.3wheelerworldforums.com/showthread.php?t=16277

[Bryan Raffa]

no the swinger will not work, its off set where the motor sits, And i thought the skid mounts were the same as a banshee and warrior.. Mounts To the tabs under the swinger.. witch the z dont have...

[twgranger]

The blaster skid does not work!! I have read here before that it does so i bought one and it dont work.

[GoodKarma]

Seems to be some disputes about the guard fitting. I'll buy one and see how things turn out.

Maybe I read that the swingarm bolt, and not the swingarm, fits? I have looked through the Tri-Z article about replacement/interchange parts, and it seems a bit helpful!

Thanks for the help folks! I have a nice little project going on right now, and I'll put some before and current photos out here soon.

[TimSr]

Neither the swingarm, nor the skid plate from the Blaster (or anything else) will fit the TriZ. No dispute here. Had 'em, tried 'em, they dont work.