View Full Version : New member quick question
xracer771
11-16-2006, 11:09 PM
after 20 years I finally got another 3 wheeler, I got an 84 200x off of ebay, it is in the process of making its way to me via a cousin and 2 uncles. The problem listed in the sale ad was lights do not work, where should i start when I get this critter home? This site sure brings back some of the good stuff.
WIkid500
11-16-2006, 11:17 PM
Well I think there are wiring diagrams on the homepage, if not someone here will have them. Check power I guess at the stator, or lighting coil. Go right to the source, then trace it around, could be a switch, broken wire, or a bad ground.
Welcome to the forum you will like it here.
bigreddaddy
11-16-2006, 11:36 PM
Yeah definitely get a manual for it. Welcome!
Eric250R
11-17-2006, 12:25 AM
Yeah, the first thing I would check would be the bulbs and connection itself at the head light, then the headlight on/off switch.:welcome:
ATCR250R
11-17-2006, 12:27 AM
If you want to pickup a manual for it, I recommend contacting Dammit! here on the boards. Have fun with your new trike!
xracer771
11-17-2006, 01:11 AM
thanks for the info guys, I have a good place to start, cant wait to get this thing in the garage.
:beer
russell56443
11-17-2006, 04:39 AM
Hey another minnesota person :beer
Where are you located?
Im near Little Falls,sure would like to find some Minn trike Enthusiasts close to me to ride with!!!
Anyway,Welcome to the board,it's a great site!!!!
oldsking86
11-17-2006, 05:23 AM
THen your next thing is getting it out for it's first ride! :welcome:
Dammit!
11-17-2006, 10:24 AM
The link to the manual info is in my sig.
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.