Look what I have been up to.. Nitrous 250R

[Mike Fort Laud]

I have not posted here in awhile. I have had a lot of other projects going on and have pushed the Honda's to the rear. Anyway somebody outran me so I had to step it up a little............It is a wet system. The solinoids are mounted in the airbox and the battery,fuel cell and fuel pump go in a cooler on the rear rack....For some reason I just had to order a new clutch...Go Figure........

[devildog_0431]

Sweet get up.:D

[84honda200s]

nice man. there will be no out running now.

[200x Basket]

nice but that bottle bracket looks flimsy. so what kit did you use? how does the 250r like the bottle?

[Bryan Raffa]

you should put the bottle in the cooler also with the shut off sticking out a hole to complete the sleeper effect! lol

[Mike Fort Laud]

I kind of pieced the kit together with the parts I needed. I am friends with the local NOS dealer. It has the plastic lines from the solenoids to the nozzle tapped into the reed housing. It sure wakes it up. I have to mess with it a little more but at high rpms with it stretched out the thing comes on strong. It is not that great from a stop. So I hit it at WOT after 3rd gear and it just keeps pulling. As far as the bracket being flimsy. Not at all. It is a solid billet bottle holder. The bottle does not move. As far as hiding the bottle..NEVER.. It gets more looks and people pointing at it than ever before.

[WIkid500]

how did you rig up the fuel delivery? A second fuel pump? Just curious?


Lookin good!

[Mike Fort Laud]

I bought a one quart JR. Jragster fuel cell from Summit Racing for fuel. I did not want to tap another hole in my tank for fuel. I could not put a Y fitting either because the electric fuel pump will pull from the carb. I have a tiny inline fuel pump. It is about4 inches long and 1 .5 inch diameter. For power I have a real small battery I bought at a hobby shop. The solenoids are mounted in the airbox upside down and I used the two screws that screw the airbox to the frame to secure them. I like everything in the cooler so I can easily remove it. I hate the way it looks with the six pack rack so I put my polished DG grab bar back on. The Nitrous is not for "NORMAL" riding. I can mount and rig it on in about 30 minutes. I take the spray nozzle out and screw in a pipe plug.

[200x Basket]

i just have one more question. my 250r will not keep the front tire down in 3rd so how does the stock swinger work for you on the bottle.

[SYKO]

how does the nos effect the realialbility of the motor? dosnt it get leaned out when its used?