exaust leak on a triz

[mnnmaz]

I have an 85 triz with a DG pipe and silincer my question is, how do you stop the oil comming out of the front where the pipe mounts to the jug. I have the two inserts that come with it and I purchased three new spring but it still leaks and I dont like cleaning oil off the front of the jug every other rid :) any ideas to solve this??? :confused:

[firecat]

Their is a productcalled chamber seal it costs 7.00$ and you can get it from rocky mtn atv.its a high temp.sealing tape you wrap around your exh. flangeand makes a nice tight seal.

[Rennat_2006]

High temp silicone works good also, I used it on my 1985 ktm 125 and will probably do the same on my 1991 ktm 540 when i get it going.

[Kintore]

Most guys use high temp RTV silicone, the orange goop. Works good for a few months then reapply. Or at least in my case, but also I put alota hours on my machines.

[asc180]

RTV orange is a better way to go than the exhaust tape. I have tried both and the RTV worked longer than the tape.

[Bryan Raffa]

I use orange rtv nice thick bead put the pipe on and let it sit over night to fully cure..might take a few time to get it right

[Rennat_2006]

Yeah the Orange RTV is what i was referring too. Make sure to clean the area which it is going to stick to VERY well.