hydraulic rear brakes

[Air-cooled-R]

What, if any, hydraulic rear brakes will bolt up to a blaster rear end? thanks.

[jason85atc250r]

none will. you have to modify the brake caliper mount and weld a bracket on the frame for the master cylinder and a tab on the pedal for master to attach.

[SYKO]

yep what jason said, just get the parking cable delet cable from vitos and put new pads on and adjust the rear caliper, then they work great, my set up my gf's blaster like that and they work great.

[bigred1981]

I thought there was a kit to convert the Rear to hydraulic.. I'm sure it's expensive though. I think you have to buy the whole bit..maybe cheaper to get the cable-operated brakes working better.

[bigred1981]

I thought there was a kit to convert the Rear to hydraulic.. I'm sure it's expensive though. I think you have to buy the whole bit..maybe cheaper to get the cable-operated brakes working better.

[jason85atc250r]

all you need to do is steal the brake parts off another type of quad. just get whole rear system from a banshee or raptor or something like that. then weld the tabs on like i said and it'll be way better then a Vito's cable you guys speak of.

or go on ebay and buy the parts from a blaster with hydralic disk brakes.