200M stator upgrade.

[Mobular]

Ok, this seems simple enough, but I'm going to throw it out here for the feedback. I need to increase the output of my 200M's alternator for a lighting upgrade. Will a 200ES stator bolt directly in? The online manual pics look identical, but the the outputs are 45W for the 200M and 70W for the 200ES. Sound doable??

[Howdy]

Going from memory, I'm thinking the stators are quite a bit different. I would say that if you could use a 200m stator, then you would also have to use a 200m wiring harness and add a battery. This way you don't over charge the system.

I was just thinking that the 200m stators, the 200e, and the 200es stators are pretty much the same.
Howdy

[Mobular]

There is already a battery and harness as the trike is a 200M. I just need to bump up the output wattage. Would the 200ES stator idea work?


Going from memory, I'm thinking the stators are quite a bit different. I would say that if you could use a 200m stator, then you would also have to use a 200m wiring harness and add a battery. This way you don't over charge the system.

I was just thinking that the 200m stators, the 200e, and the 200es stators are pretty much the same.
Howdy

[Howdy]

Oooops!! I must have been trying to read too many postings at the same time. I was thinking you were doing this to a 185 / 200. MY BAD!!

I would think the 200e / 200es stator would work. But I'm not 100% sure. I wished I had both to compare for you.
Howdy