10" front on tecate B

[StreetLegal]

Is there any trike hubs with 10" front rims that I can swap on my 86 tecate front. I want more of a selection of tires with a 10" instead of an 11". Do any of the hondas have 10" fronts that will work?

[Mr. Clean]

Welcome to the forum!!! Do a search on 10" front rims. I posted some information about a custom wheel order from Douglas wheels. $104 plus s&h 4-12 week delivery time for a wheel for my 250r.

[StreetLegal]

Ok, what is the front wheel bolt pattern? I measured 6 3/4 inches(about 4/171mm). I never heard of a bolt pattern that was 171mm. Did I measure wrong?

[scooterroo]

another t3 b owner, nice. and in new york as well. i have both an 85 and an 86 myself. the bolt patterns are 4/156. on the believe 4/156 is the same on all three wheels on the 86/87 model.

[StreetLegal]

After hours of browsing the web, I found out that the front wheel bolt pattern is 4/170mm. Technically, I dont have an 86 tecate. I just have the front end on my motorcycle trike Im building.

[cr480r]

The '85 Tecate is 4/155 all around. '86 is 4/170 front, 4/155 rear.

[scooterroo]

dennis kirk lists it as 84 model being 4 on 4 inch, all three wheels. 85-87 model as 4 on 156mm, all three wheels. i also know this as being true because i had my spare blaster fronts on my t3 for a bit to move it around. not saying i am right, or saying i am a know it all, just saying what dennis kirk lists right in there catalogue.

[cr480r]

dennis kirk lists it as 84 model being 4 on 4 inch, all three wheels. 85-87 model as 4 on 156mm, all three wheels. i also know this as being true because i had my spare blaster fronts on my t3 for a bit to move it around. not saying i am right, or saying i am a know it all, just saying what dennis kirk lists right in there catalogue.

Well they list 4/156 wheels because they will fit on a 4/155 application. Try putting that blaster wheel on the hub off your '86 roller...

[cr480r]

just saying what dennis kirk lists right in there catalogue.

My Advantage Performance Distributing catalog lists '85 stock wheel as 4/155 3+5.5 on all three. It shows '86-7 as 4/155 3+5.5 rear, and 4/170 3+3 front. My 4/156 bolt on spacers didnt' line up properly on my 4/155 rear hubs, And blaster front wheels had to have the holes enlarged to fit on a Mojave which is also 4/155.

[tecatecrazy]

the pattern is 4/156 not 4/155

[cr480r]

Stock wheels are 4/155. Replacement wheels list the more common 4/156. Ever wonder why they fit so tight?

[StreetLegal]

But the front of an 86 is definately a 4/170. I measured it.

[scooterroo]

bump....so what is the correct bolt pattern and offset? i wanna order myself up a 10" rim here for the 86, ang get one of the duro flat track tires for the front.

[deathman53]

I found that 85/86 atc250r front rims fit on 86/87 tecate front hubs. the tecate front rim is wider than the honda. All aren't offseted, it bolts in the center.