38mm airstriker carb needs different throttle cable

[rustyhondas]

i been running for a while a big old PJ ,off a who knows what year cr500

i put my PWK 38mm airstriker on today.

i instaled a reed spacer and a V force reed cage, got the carb onto my stock intake boot and air filter boot. no real trouble you just need to boil them for a half a minute or so and slide it over a bottle. i used red wine vinigar. then be a man about it when you put them on.

i use a motionpro twist throttle. the cable that fit the PJ don't fit the PWK.

the little brass adjuster fitting on the Cap of the carb is for a smaller diameter cable end on the new airstriker.

do any of you know where i can buy this cable?

my twister is good. i just need a cable.

The cable on the old PJ was big like 1/4"

I dont remember what the old 36 was like. i have had my share of carbs,cables ,and throttles on this motor ,And I can't remember having this problem before.I have had it allmost 10 years now.,so who knows.

[rustyhondas]

Beuler..........................Beuler?

[x.system]

Motion pro has the cable you need but don't ask me for a part number.

[rustyhondas]

you wouldn't happen to have that part# would you x.system ...........just kidding.

I looked at there web site first. and it sucks. they ask what make ,year what model and thats it.


it'l come around to me. theres got to be a few here who have ran into this.

[x.system]

I just bought one for a pwk but mine was for a thumb and I know it takes a different part number for the twist. If you call 402-614-2508 you can get the right one or they can give you the part number.

[rustyhondas]

duuuuuuuuuuu ................i forgot about just contacting them.:crazy:

thats it, i'll be rollin soon. thanks.