will these wheel spacers work?

[kilabeez0]

http://cgi.ebay.com/ebaymotors/5-wheel-spacers-honda-300ex-400ex-450r-suzuki-z400_W0QQcmdZViewItemQQcategoryZ43983QQitemZ320093 799920QQrdZ1

http://i13.ebayimg.com/05/i/000/92/c6/e35c_1_b.JPG

I have an 85 atc 70 with the 3 lug hub. the spacers are 10 X 1.25mm. i know that is for almost all honda's but the 70 could be smaller, i'm not sure:wondering

[Liquid-Darkness]

Those spacers there, are they supose to bolt on to the hub bolts?

[kilabeez0]

yes

adfadsfa

[Bryan Raffa]

seems like a alot of stress on the studs to me

[Tri-ZNate]

yeah I'm with raffa. If your doing any sort of leaving the ground with this machine i wouldnt buy those

[kilabeez0]

ok maybe you guys need to read a little closer. THIS IS FOR A 70. i'm not worried about leaving the ground and putting stress on them. i just want to know if they'll fit.

if you can find me an extended axle for a 70 i'll do a backflip with my 70.

[kilabeez0]

ok maybe you guys need to read a little closer. THIS IS FOR A 70. i'm not worried about leaving the ground and putting stress on them. i just want to know if they'll fit.

if you can find me an extended axle for a 70 i'll do a backflip with my 70.

[Liquid-Darkness]

I was just tripped out because I always hear people talking about wheel spacers and I never seen a pair. I do agree with the others, it does look like alot of stress on the bolts. Not for a 70 though, that would be ok for a toy/pit bike.

[TimSr]

They work okay for some suspended minis with a 4 lug system, and a child size rider. We had some on TimJr's Raptor 80. To put them on something with only 3 lugs, and no suspension, and I assume you are not a small child, Id bank on them snapping, air or not. In all seriousness, if you need wheel spacers for a 70, you might want to consider going with a quad.

[kilabeez0]

well i haven't asked for anyone's opinion, just if they'll fit.

and it's for looks