need help 200x

[xman23]

alright during winter i installed a new webb cam, but ever since i put the cam in, it takes alot more kicks to fire up, it used to fire up 1 or 2 kicks everytime, now its like 10 int he winter sometimes ill have to pop start it, i put a bigger jet in but is it to big

[xman23]

anybody have any ideas?

[Dirtcrasher]

Sure sounds like a jetting problem. Which jet did you change?? They usually all need to be tweaked after a cam change. I wouldn't be running that air box lid either, way to restrictive. Then you'll have to read your plug.

Read the sticky post by DAMMIT! about jetting.

[xman23]

yea i just pumped up my main jet for the winter cuz im running a pipe on mine, but i didnt change the piolet jet, i think i was to rich to begin with, and i have my lid on my airbox to, would this couse it to be a pain to start? becuasebefore thecam it started 1 or 2 kicks everytime, now its like 10 or more

[Dammit!]

Does the choke work? Make any difference at all?

You can try this. After you kick it a few times when it's cold and it hasn't started yet, pull the plug and see if it's wet or dry. If it's dry, go up a size on the pilot jet and try again.

[xman23]

yea the choke works and evrything, im gonna try and mess with the jets to see if that helps on monday, but im still trying to figure if theres something else

[SYKO]

I think its a valve problem, recheck the adjustment on your valves, my 200x was a bear to start then I adjusted the valves and vroom 2 kicks!