PDA

View Full Version : 200x Kick start side case



SAMM
04-11-2007, 09:42 PM
How hard is it to replace a 200x kick start side case ?? Something tried to get out of this one ?? can it be removed with engine in the frame ??
Thanx

edog
04-11-2007, 09:56 PM
YEs.....

Do you need a case?

SAMM
04-11-2007, 09:59 PM
How much ?? I may also need the kick start gears ??

oldred95
04-12-2007, 08:33 PM
Take the bolts out that hold the case on, take the kicker off and clutch cable. Hit the cover with a dead blow hammer or rubber mallet and it should pop right off. Be careful with the gasket and try to peal what might stick to the cover off so that it all stays on the case. You do not want to tear this gasket because cleaning it off is a nightmare and you can easily gouge the case doing it. IMO its best to reuse the old gasket if it doesn't get torn. No idea on the kicker mechanism though. Never been into one of those.

tapper190
04-12-2007, 09:28 PM
Don't forget to drain the oil first!!!
Tapper