View Full Version : 198? 250r Help
quick99
05-28-2007, 02:16 PM
I just picked up a roller 250r chasis and first i need help figuring out what year it is. It is obviously all red and has 250 written in white on the gas tank with honda above that. It has a disc front brake, drum rear and a twist throttle. Also it is a right handed chain drive which i noticed was different from my left hand 200x. Also it has a red shock in the rear ( i have no clue if this matter or helps i just know my X has a blue one)
As for the trike itself its a roller no motor but everything else is there minus a few minor parts. I have taken pics but have to get them put on a CD before i can post.
Your guys help would be appreciated.
Oh yeah and does anybody have a good condition motor out there for me?
Jake
SWIGIN
05-28-2007, 02:18 PM
81 or so i would say
quick99
05-28-2007, 02:29 PM
yeah i have come to the conclusion that it is an eighty one also due to the changes i have looked up in pictures online. Is this thing worth sticking a motor in or should i just part her out. I know it will be faster than my 86 200x and a hole lot slower than the 85-86r's.
So what do you guys think i just wanted a two stroke and thought i got a pretty good deal on what i got.
mike from long island
05-28-2007, 05:09 PM
Do you have any ways of posting a pic? Also if it just needs a motor.You can probably find one here on 3ww or ebay.But if you do decide to part it out,Let us know.I need some parts from an 81 250r Good luck.
1upfront
05-28-2007, 07:46 PM
81 250r because they had a drum rear.
quick99
05-28-2007, 09:14 PM
so what is the consensus keep or sell this beast....is the power that much better than the 200x is it a fun little snappy trike?
mike from long island
05-28-2007, 09:16 PM
is the power that much better than the 200x is it a fun little snappy trike?
you said it.they are fun bikes.
quick99
05-30-2007, 12:20 PM
so i am assuming that 81-84 250r motors are a direct bolt in for an 81? Where is the best place to find a complete/semi complete motor around here?
3Wheelers4Life
05-30-2007, 03:12 PM
so i am assuming that 81-84 250r motors are a direct bolt in for an 81? Where is the best place to find a complete/semi complete motor around here?
im pretty sure there a direct bolt in but im not 100% sure, check with someone else. the best place to find a motor is here on the boards in the classifieds, or on ebay.
81-84 motors will all interchange personally I like the 81-82 R's and may pick up one later for myself.
1upfront
05-30-2007, 03:50 PM
The only thing different between the 81-82 motors and the 83-84 motors is color, the shifter, and the shifter shaft, it is shorter on the 83-84 models but it can be interchanged.
quick99
05-30-2007, 05:34 PM
Good that makes life a lot eaiser b/c thier is a few on ebay right now.
A few more questions. I can take and push on the side of my trike and the swing arm seems to have about a 1/16 inch worth of slide on the axle ( side to side type of deal) I am assuming that the bearings inside the swingarm where the axle is housed is shot right? Also can someone post a picture of what the swingarm/Chaing adjustment is supposed to look like on a 81 250r (close up if possible because i believe there are some parts of mine missing)
Also what fork assembly will fit this trike. I read 83-85 200x are a bolt on but is there any truth to this? If not are there others? I just want to get rid of that massive tire set up!
Jake
3Wheelers4Life
05-30-2007, 08:06 PM
check here, they give you diagrams of the parts and how they go together, click on the part you need. http://www.bikebandit.com/partsbandit/oem-nav.asp?submit_from_stage=4§ion_dept_id=1&model_dept_mfr=Honda&model_dept_year=1981&model_dept_id=190796
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.