Log in

View Full Version : atc 200e no spark



CRF230F
06-12-2007, 02:32 PM
My 1983 200e is not getting any spark. I replaced the front sprocket by taking off the left case, starter and all, and before that it started and ran. I tried a new plug (the same one that was in it before Champion RA8HC). Is there anywhere i should start to look to get it to spark?

Also it sounds as if the starter is revving faster than normal but that just may be in my head....

70ATC90
06-12-2007, 03:20 PM
Check the CDI

3Wheelers4Life
06-12-2007, 04:10 PM
check the connections and wires.

RedRider_AK
06-12-2007, 04:25 PM
Check to make sure your ground is properly attached. I have had the same problem before, pulled an engine out of a chassis and it lost spark. Turns out I plugged some stuff in wrong. DOH.

CRF230F
06-12-2007, 06:20 PM
Where is the ground?

RedRider_AK
06-12-2007, 07:19 PM
Any wire or metal peice on the electricals that has a connection to the frame or engine is the "ground". Usually a green or black wire.