The 85 200X performance topend QUESTIONS?

[Dirtcrasher]

I'm gonna rebuild my buds 85 200X topend. It's down to 60psi compression and won't start well. So, no use just rebuilding it to stock settings. I want to cam it, valve springs and the topend is noisy as crap and must need a camchain and tensioners, both sprockets and I believe he bent a valve sinking it last week. Honda 200 motors are loud period but I hope changing the cam chain and it's parts will help.

SO.... You guys have the 85 model, not me. What did you do and buy? I want to give him a 10.5:1 piston, bore it to clean it up, a nice cam to run on super unleaded gas, valve springs and I'm concerned about the chain/sprockets and guides. I believe Honda is discontinued. Vesrah valves work, do the have a chain and sprocket and guide kit or who does? I've only seen the DID chain for sale for the cam drive. Gotta do valve seals but I hope the guides are good. I think only Honda has those?

Anybody offer a whole kit??

Ideas? Prices? Products?

THANKS :)

[84honda200s]

all the stuff is not discontinued. here are the oem part numbers.

14550-527-000 cam guide slide

14500-427-000 cam tensioner

14231-440-000 top cam sprocket

14311-007-000 bottom sprocket


and the parts above will also fit an 83-85 200x, 81-83 200, 84-86 200s, and 80-83 185/185s. along with xr200 and trx 200. if you want prices call your local dealer and give em those numbers.

[edog]

Pm sent.........