PDA

View Full Version : bolt problem


350Xccelerator
05-08-2003, 09:57 PM
i was taking the pipe guard off my 350x today and i was taking off a bolt and the bolt broke off leaving half of it still screwed in. How can i take it out.
Yamaha_Rules69
05-08-2003, 10:38 PM
You could just drill it out and put a nut on the otherside. That is one of the easiest ways. Otherwise, if there are still threads viewable, you can just put another bolt in to push the broken piece out. There are many other ways too.
wanta250r
05-08-2003, 10:39 PM
A screw extracter
350Xccelerator
05-10-2003, 01:03 AM
can i go to my local honda dealer and get some new stock bolts?
als250
05-10-2003, 01:48 AM
can i go to my local honda dealer and get some new stock bolts?

yes, or you can go to your local hardware store, also. Go to: bikebandit.com to find size of bolt. ;)

Al
Howdy
05-10-2003, 09:54 AM
i was taking the pipe guard off my 350x today and i was taking off a bolt and the bolt broke off leaving half of it still screwed in. How can i take it out.

You can also use a reverse drill bit.
Howdy