PDA

View Full Version : 1986 350x


Satsol67
08-07-2007, 09:43 AM
Over the weekend I went and picked up a 350X for 150 bucks it needs all kinds of work but I think it will be worth it. I am going to see if I can get it running before I strip it down to the frame and do a rebuild. I got a few things for it on ebay yesterday like the kicker so I can do a compression test on it.

Anyways Iam sure I will be here more often now to research and ask questions. I did find the service manual online so that will help. I am going to need a lot of parts if anyone has some.

Thanks,

Ron
Eric250R
08-07-2007, 12:27 PM
Can't really help you out on the parts, just got rid of all my X stuff. But :welcome: :welcome: :welcome: to the boards.
ceaserthethird
08-07-2007, 01:04 PM
Yeah Welcome to the fourms ... Lost of info !

Do a search if you can't find the answer just post the question ...

is this your first 3 wheeler ?
ovhonda1
08-07-2007, 01:48 PM
I have lots of misc 350x parts if I can help. Welcome to the boards!
jcraig
08-07-2007, 01:50 PM
ovhonda1
you got a air box tube for sale
Satsol67
08-09-2007, 09:37 AM
Yeah Welcome to the fourms ... Lost of info !

Do a search if you can't find the answer just post the question ...

is this your first 3 wheeler ?

No this is my fouth one but it has been many years sence I have had one. I had to sell my banshee earlier this year so I got this to help with my jones until I can get another one.
Satsol67
08-09-2007, 09:47 AM
I have lots of misc 350x parts if I can help. Welcome to the boards!

I have won some of the stuff I need off ebay. Other things I will need is stuff like voltage rec, Light switch, I'm not sure if I want to use the stock airbox or get the k&n one, I do have the stock one but its missing the air tube that goes from the box to the carb, Rear brake fluid res, swingarm carrirer sp, all plastics and seat, along with others.

What I want to do is see if I can get the motor to run so I can check out the trans and clutch then take it down to the frame and have it pc'ed and basicly do I complete rebuild.

If I do a complete rebuild of the topend is it worth doing a p&p and get a better cam? I havent looked that hard for a better cam are they even out there?

Thats it for now. Thank you for the welcome everyone. I sure I will be spending a lot more time here as work permits.

Thanks,

Ron