250SX w/ 200X front conversion

[the great gazoo]

I've finally got my motor back in my '85 SX that I converted to a 200X front & did a search for pics of steering stops- I got one result, & it was MadMax's, but the dang pics won't load(Dial upper)- I've got a couple ideas, but I'd like to see pics of what anyone who's done this has come up with. Thanks in advance guys, TGG.................

[Dirtcrasher]

Mine must be on there because I posted them a long time ago. Best to use the 200X stop off of that frame and migweld it on there. I made mine, use cardboard first and then trace onto steel. I believe I used .1875 thick steel.

Make sure to have a junk lower race in there while you weld the stop on there. It will keep the frame tube round and not damage the stock race with the heat. I knock out the good one and use a beater. But, I only knock it in to where it is right behind where I'm welding the stop onto the tube.

[the great gazoo]

Thanks for your help, DC-I'll try & find a junk lower to use in there while it's being welded............

[Tri-ZNate]

Gazoo i hope you werent waiting for me to chime in because I didnt make stops on mine. I like it TIGHT :naughty: