PDA

View Full Version : Top End Kit For 200M?



84 ATC 200M
10-02-2007, 06:48 PM
Well I Wanna Fix My Trike Up. It Needs New Rings And Pistons, So I Called My Local ATV Fixer Upper. I Told Him My Problem And Just Asked To See How Much It Would Be To Rebuild My 84 ATC 200M....Well He Said $2000 And I About Sh!t My Pants. I So I Was Talking With My Uncle Witch Is A Mechanic/Welding And He Said Well Thats Way To Much And Say You Can Buy Top End Kits And Bike Is Well Like New Sorta Well Ya Know. And I Was Wondering Where Can I Get A Top End Kit And Just Because I Am Wondering How Much Would It Cost To Rebuild MY 84 ATC 200M I Was Thinking $500?

Thanks For Talking The Time To Read This.
:)

DeePa
10-02-2007, 07:34 PM
http://cgi.ebay.com/ebaymotors/NEW-Honda-Atc-200-200S-200M-Engine-Top-End-Rebuild-Kit_W0QQcmdZViewItemQQcategoryZ43977QQihZ011QQitem Z320163345347QQrdZ1QQsspagenameZWDVW

http://cgi.ebay.com/ebaymotors/NEW-Honda-Atc-200-200S-200M-Engine-Top-End-Rebuild-Kit_W0QQcmdZViewItemQQcategoryZ43977QQihZ011QQitem Z320164015617QQrdZ1QQsspagenameZWDVW

the more expensive one has the cam chain/tensioners/etc...

or just get a bore/hone/piston kit and youll be set...might as well check all of the top end too...cam, journals, rockers, valves...

whats the condition of the trike? Does it smoke? Low compression?

Mike

84 ATC 200M
10-02-2007, 07:43 PM
Compression Good, Um Plastic Busted Up, Also Needs Some Things But Good,Does Not Smoke.

84honda200s
10-02-2007, 07:44 PM
i did a total rebuild for around 500.00 thats valves, piston, rings, rod, crank bearings, cam chain sprockets, cam chain tentioners, full gasket kit, and a couple other things. most of the stuff came from dennis kirk or evil bay.

oldred95
10-03-2007, 05:59 PM
I think I payed 50 to bore it and 30 to do the valve job on my 200x ( supplied the parts and all parts were new aftermarket bought off ebay for about 150 total) and I had about 230 or so in the engine when it was said and done. I went ahead and did some port work and the head needed to be plained to and all in all it runs very well for being otherwise stock.

84 ATC 200M
10-03-2007, 10:32 PM
Anyone Got Canada Prices For Top End Kits?

McDerry
10-04-2007, 01:43 AM
If It doesnt smoke and tis got good compression, Why do you want to rebuild it??

84 ATC 200M
10-04-2007, 09:16 AM
Cuase The Pistons And Piston Rings Are Shot

McDerry
10-04-2007, 11:14 AM
Cuase The Pistons And Piston Rings Are Shot

If you have good compression and it doesnt smoke, then there not shot.