PDA

View Full Version : Oil Injector


james9r9r
10-21-2007, 01:10 PM
Ok I have a 1982 Yamaha Tri-Moto 175cc 2 stroke and I dont think its getting oil and Where is the oil injection pump located? inside the crankcase or on the bottom outside?

Ok I want to know how to get rid of it and just premix 32:1 mixture gas/oil.

Like what do I have to take off and Plug off?:Bounce :Bounce :Bounce :Bounce :Bounce :Bounce :Bounce :Bounce
james9r9r
10-21-2007, 02:05 PM
Why won't anyone say anything ?
Dirtcrasher
10-21-2007, 04:17 PM
Man you are one PITA. Have some f$#@!@$# patience, plenty of people here have tried to help you. Maybe THEY DON'T KNOW, maybe they are riding.

Where is your god dam F'N manual???????? That will tell you INSTANTLY Mr impatient.
james9r9r
10-21-2007, 05:16 PM
Ok I got my manual and it doesnt say how to just premix and what the cap off.......
ATC-Eric
10-21-2007, 06:07 PM
SEARCH BUTTON!!!!!!!!


Found me these related topics. PLEASE use the search button in the future instead of making 5 of the SAME posts.

NOT the same bike, but it can be applied to your injection system. PLEASE READ this, and dont ask more questions about this perticular thread:

http://www.3wheelerworldforums.com/showthread.php?t=36003&highlight=oil+injector

Another thread that might help you peice together your answer:

http://www.3wheelerworldforums.com/showthread.php?t=35009&highlight=oil+injector

YET ANOTHER thread I found with 2 minutes worth of searching:

http://www.3wheelerworldforums.com/showthread.php?t=67070&highlight=oil+injection

In the future if the search button brings you no results, be patient with the ONE thread you make about your issue.

IF someone can help you out there, THEY WILL!!!!!!!!!

Have a nice day.


:D
james9r9r
10-21-2007, 06:19 PM
just dont put oil in the injector and plug off the little line that runs to the cylinder-like the fitting on the cylinder itself for the oil line and your good to go.

iS THAT ALL I HAVE TO DO ???
yamaha_ripper98
10-22-2007, 07:51 AM
you can if you dont know how to take it out and block it off

might burn up your pump tho
Nightbiker07
10-22-2007, 04:29 PM
or just leave the system intact and put the premix into the tank.
Mr.Jake
10-22-2007, 04:36 PM
oil pump is located to the right of the oil filler. Inside the plastic black cover. If it doesnt work, just take the oil tank off and plug up all the tubes it attaches to on the carb then mix 32:1. if you dont plug the tubes it will suck in air and wont run or run like crap.