PDA

View Full Version : banshee help...plzzzzzz


HEAD09
10-21-2007, 07:58 PM
okay...well i friend bought a banshee a month ago and and he just redid the wiring harness(got a new one that is) so all we did is change out the wiring harness and the few switches he was missing and now is sounds like it hitting a rev limiter at mid range no power at all so whats up....it a 89 what could it be??? cdi or coil???like i said it ran unbeleiveable before... thx
oldsking86
10-21-2007, 09:53 PM
Well stock banshees do come stock with a rev limiter built into them so that's what it could be. There's something you can remove and it'll scream! but you don't have that added protection if over revin the motor and blowing it up
HEAD09
10-22-2007, 05:38 PM
well how do you fix that problem...
Mosh
10-22-2007, 06:38 PM
The wiring harness you switched,did it have a little black box wit 2 wires mounted to it?It bolts on under the gastank at the front frame rail.That is the tors system.Make sure it is disconnected.Just unplug it all together.

Did you change out the original cdi and coil too?
HEAD09
10-23-2007, 01:12 PM
yes i had it.... and i tryied unhooking that also no change in the running of it going to get a new coil and cdi this week...
SYKO
10-23-2007, 02:57 PM
once you unhook those wires you have to hook them together,to form a loop
HEAD09
10-23-2007, 04:25 PM
which too form the loop the... tors ?
HEAD09
10-23-2007, 04:26 PM
it has 3 wires....on the tors
wizzard
10-23-2007, 04:29 PM
I think the two you just unhooked...
wizzard
10-23-2007, 07:21 PM
oh............................
Yamahondaman
10-24-2007, 03:22 PM
i take that little box off and throw it away .. cut the wires on the thumb,cut the wires on the carb's and the wires that go to the carbs on the harness and the wire off the harness that goes to the little box
HEAD09
10-24-2007, 06:26 PM
thats the way it was... and ran great.... but he wanted it to be stock again...:crazy:
Yamahondaman
10-25-2007, 09:56 AM
STOCK ???? WHY ???? stock is slow and they run hot.. let em breathe alittle
oldsking86
10-25-2007, 01:14 PM
I wasn't to sure where the box was located but I know what it was. Yea hack that sucker all off and leave it be... it's still "stock" if you think about it haha just took off added weight

Just remember, be cautious of over revvin' it
Yamahondaman
10-25-2007, 05:37 PM
hey Mike ... Anybody with a 2-Cycle that runs it 4 miles TOP END on a Road and or hits the rev limit without "letting off" .some .... doesn't need a 2-Cycle'd Bike ! :naughty:
oldsking86
10-25-2007, 11:40 PM
Good point haha I remember some dude on E2S was getting ranked on because of that
Razgriz-Fighter
11-04-2007, 12:54 AM
If his shee he has now, has the TORS Removed off the carbs, then he should just unplug the TORS control unit (3 plug box), and well do whatever with it. If you think it is hittin a rev limiter...TORS will only allow it to rev to 1/4 throttle give or take. But yes, for him to have a stock, all connection wiring harness, he will have to have the throttle wires cut, the TORS unit unplugged, and I can't really remember what else right now

Oh and Banshees do not have a rev limiter if the TORS is removed.