stock needle for 86 Tri-Z

[ColeTrickle]

So far I've found all the stock info for 85 and 86 carb set-up here on the boards except for the stock 86 needle. Even the parts listing at the dealer just says needle set. Anyone know what's stamped on the 86 stock needle?

[DeePa]

Dan...in the manual, on the page with the picture of the carb it says...

Needle - 6H3-3
Slide - C.A 2.0
Main Jet 470
Pilot - 45

Also in there, it says under Tuning and Repair Parts...Jet needle - P-2

I dont know if this is for an 85 or 86 though...

Mike

[brrcuda]

thats for #s for the 85. 86 is different. Anyone got a 86 manual? It would be good to have this data in one thread.

[Bryan Raffa]

86- P-4 needle

[Bryan Raffa]

this is 85 carb

[ColeTrickle]

Thanks for the info! The needle for the 86 is 6F8-4.
the needle jet or emultion tube or main jet holder or the thingy the needle slides into is the P-4