PDA

View Full Version : New 250sx plastic??


prohemi500
11-23-2007, 11:06 PM
Does anyone in the world have an OEM set of 87 250sx plastic that they will sell?? I am almost ready to give up!!:confused:
Tri-ZNate
11-23-2007, 11:08 PM
Good LUCK! I rarely see OEM '85 plastics.
chris200x
11-23-2007, 11:35 PM
I believe all three years have the same rear fenders. only thing diffrent is the decals.
rally4x4racer
11-23-2007, 11:45 PM
are you building a nos bike? i think the maiers are a better option since they have not sat around and dried out for 20 years...
Twilight
11-23-2007, 11:56 PM
Call a Honda Dealer around you! I was able to get a speedometer for my 86 200x and FL350 odyssey at mine =)
prohemi500
11-24-2007, 12:01 AM
Unfortunately for me, I need OEM fenders, and I have tried alot of old dealers and can't seem to come up with anything.
Tri-ZNate
11-24-2007, 12:05 AM
Well they are all the same P/Ns
101300-001
jasonb01
11-24-2007, 12:06 AM
Call a Honda Dealer around you! I was able to get a speedometer for my 86 200x and FL350 odyssey at mine =)

What do those speedometers cost from Honda if you could actualy find one at a dealer?

The Maier fenders don't look to bad at all. The worst part I can tell is where the mudflaps mount on is kinda cheesy. You HAVE to have original mudflaps. The Maier flaps look like crap.
chris200x
11-24-2007, 12:08 AM
What do those speedometers cost from Honda if you could actualy find one at a dealer?

The Maier fenders don't look to bad at all. The worst part I can tell is where the mudflaps mount on is kinda cheesy. You HAVE to have original mudflaps. The Maier flaps look like crap.

maiers dont have the nifty toolbox like the OEM's either.

Wheeliepop... wheres a good site to get honda part #'s? cant seem to navigate service honda that well.
Twilight
11-24-2007, 12:10 AM
The whole kit for both came to 112.41 not bad for the speedo, mount, drive, and new in box! lol
rally4x4racer
11-24-2007, 12:17 AM
wow twilight....

weird, your right. it looks like they are making a one piece.. http://www.maier-mfg.com/shop.cfm?action=list&page=list.cfm&criteria=101&makeid=10&modelid=153&modelyear=1985
Tri-ZNate
11-24-2007, 12:28 AM
Wheeliepop... wheres a good site to get honda part #'s? cant seem to navigate service honda that well.


Chris I Never go on service Honda, WAY too long and a PITA

www.BikeBandit.com ;)
tkm
12-10-2007, 02:18 AM
I'm in need of the oem front plastic for a 85 250SX and have not been able to locate one.

Anyone know of a dealer with one laying around?
ATCT
12-10-2007, 12:10 PM
Chris I Never go on service Honda, WAY too long and a PITA

www.BikeBandit.com ;)

I like this place pretty well. They're helpful and only about a $1 more than Service Honda. http://www.hondaparts-direct.com/