SHOW or GO

[MR ATC]

if you had unlimited funds and could customize your trike what way would you go???

performance will all the best stuff built just for your style

or

all show with all the best stuff to impress

[moe]

I would have two say two for show and two for go,you did say unlimited funds I like my stuff to look nice all stock like the day it was built PUT!!!!.its also nice to have something that will smoke anybody ;)

[TrikeKid]

id have to go 3 for go 2 for show

[NOS_350X]

i would go 1/2 and 1/2 like kimmers it looks bad ass (nutin extremely special tho) but with that 310 kit its going to keep up with anything out there

[KASEY]

If funds were unlimited ,,,,,,,,, think bigger guys!!!! duh!!! unlimited!!!

i would hire a formula one research and development team to build a 200hp ATC500R that weighed 150 lbs,,, ahh heck why not 300hp,,, 500cc gp bikes probably make 150 hp already

i am sure there are hi-tech alloys that are lighter and stronger than titainium you know funds are unlimited,,,,, with active suspension and traction control you couldn't screw up electric paddle shifter on the bars so you can shift without lift ,,,, it would be fast,,,,,,,,, then when its finished chrome it,,,,,,, and do all the fenders in carbon fiber too

[NOS_350X]

250r good point i would hire nasa to build me one that would be light as he11 and have a grip of hp

[mudduck14843]

everyone knows its show that gets the girl .....but it takes alot of go to keep them!!!!!

i would have to say 100% show with all the go!!!!!

[smokinwrench]

250r good point i would hire nasa to build me one that would be light as he11 and have a grip of hp


I'm not so sure I'd have NASA build me a custom trike. They haven't had the greatest luck here lately.


I would have D.E.I. and Jeremy McGrath design teams work together.

I figure they could biuld me a custom trike that could run 200 mph at Daytona and a few triples right in the middle of it would just be for fun at that speed.

Josh

[4cylinders]

oooh, super polished, aluminum frame, billet everything, etc.....H2 750 kamakazi rocket. 8) 8) 8)

[ATC crazy]

I would put a Yamaha R1 streetbike engine into a modified Lonestar baja 250R chassis, with Gibson 19" long travel suspension front and rear. Bore the engine to 1200cc, port & polished, with nitrous oxide... :twisted: :twisted: :twisted:

And then something similar with a ATC250R and the CBR929RR engine :twisted:

[FullBore]

I'd have Totally restored and mint 110, 125m, 250es and 350x
I'd have a 250r that was tuned to the eyballs with everything but I would have that paint that looks like rust and have everything looking really knackered and rusty, then I'd have bets with guys on big quads for big $$ and smoke 'em! I also have a big old Dodge van with a 900hp V8 in the back and smoke people the same way!

Nat

[ATC crazy]

I also have a big old Dodge van with a 900hp V8 in the back and smoke people the same way!

Nat

Just get a Viper engine and put on the Venom 1000 kit on it for 1000HP and 1100lb of torque... :twisted:

[plkmonster2]

id go for as much show as possible, whith the most power possible..... :-D or i might just have to go atc crazy's route :twisted:

[MR ATC]

ok all you nasa scientist and car buffs back to reality. the question was what would you do to YOUR trike ie. 110-350X would you build it for show or go? lets leave all the fantasies for our nightime dreams. if you could take the trike you own and build it all show or all go what way would you go???

[J.D.]

All go man! I don't care how ragged my stuff is as long as it can get up and scoot!

[md1985250r]

GOTTA BE ALL GO...WHATCHA GONNA DO????PUSH IT AROUND THE TRACK OR TRAILS??? :rolleyes: :rolleyes:

[mudduck14843]

everyone knows its show that gets the girls .....but it takes just as much go to keep them!!!!!

i would have to say 100% show with all the go!!!!!

i'll stick with my original

[md1985250r]

THE MAN ASKED ONE OR THE OTHER..... :?

[Andrew]

i would go all go and no show(it would be a sleeper!),but its always nice to have the best of both worlds....