Anyone know of a high compression or overbore pison for an ATC 110

[81Rmachine]

My brother has an '84 110 that he wants to squeeze a few more ponies out of. He has a UNI air filter, ported head, and a custom ground cam. He's lookin for some higher compression since the stock is around 8 and a half and more dispacement couldn't hurt. Any help would be Appreciated. THANKS!!!

[MTS]

powroll makes a nice kit, for a atc90, 54mm bore, http://www.powroll.com/P_HONDA_90EARLY.htm will work with a 110 long as the cyl hasnt been bored to far

[SWIGIN]

the 90 has a smaller pin diameter then the 110 so it wont work


i looked into this years ago and ended up welding up a stock piston and machined the top.

i know it sounds scary but its still running and i tried like hell to make it come apart....lol

[MTS]

the 90 has a smaller pin diameter then the 110 so it wont work


i looked into this years ago and ended up welding up a stock piston and machined the top.

i know it sounds scary but its still running and i tried like hell to make it come apart....lol

Whoops, coulda sworn they where the same...

[81Rmachine]

Well Thanks anyway guys

[Somekindofjerk]

www.denniskirk.com has high comp pistons for the 110 and overbored

[SWIGIN]

www.denniskirk.com has high comp pistons for the 110 and overbored

not that i see