WIll a 350xor200xorTriZ front wheel assembly work on a trimoto175??????????

[piroguedog]

wanting that disc brake in the front....................

[4cylinders]

hey, swap out the whole front end.

[Vealmonkey]

Hey, buy a tri z! Just busting on ya man. If you can put a 200x front on a atc110, I don't see why you can't put a tri z front end on a yt175. I'm sure it's not just a bolt on though. Heck, I put a tri z front end on a bw200, but it was pretty easy because they had the same steering stems then it was just a matter of switching over the triples and stuff. My yt125 is across town or I would measure the stem on it and the stem on the spare tri z triples I have and give you an idea. Is your 175 front end that messed up or are you just trying something different and like the disc? Good luck either way.

[piroguedog]

narrow wheel and disc! wish i could just swap the wheel.

[Vealmonkey]

If you look at the thread how they put the 200x front end on the atc110, basically what the person had to do was adapt the triple tree stem to the 200x front end. The person cut away the lower triple tree from the atc110 and removed the stem from the 200x lower triple, then had the stem from the 110 welded to the 200x lower triple on the bottome side of the triple. At that point, the rest was bolt on. The person had the advantage of the disc brake front end, suspension, which the atc110s never had and the better looking front end assembly. I'm sure it would be pretty similar what you would have to do to adapt the tri z front end assembly to the yt175. If you know a machinist and a welder, you should just about have the problem taken care of. Now all you would need is the tri z front end assembly and do some measuring, or take the triples of the yt and the triples off the tri z and take them to the machinist and explain what you want to do to the machinist and he can more than likely fix you up.