PDA

View Full Version : 3 wheeler lift



cajunchilipeper
01-14-2008, 04:06 PM
Do they make lift kits for 3 wheelers...I have a 84 200s and wouldnt mind alittle more ground clearance

Mr.Jake
01-14-2008, 04:38 PM
you could make one with a welder, but you wouldnt get more ground clearance becasue the rear axle will still be the same height off the ground, the frame will be higher though

McDerry
01-14-2008, 06:19 PM
Bigger Tires...

SYKO
01-14-2008, 07:11 PM
keep in eye peeled on ebay for front fork extenders, they move the front wheel 2 inches forward and a few inches taller, and then like mcderry said bigger tires, if you go mud tires you need to use a lite tire otherwise you'll kill that poor motor trying to turn over some huge meats

McDerry
01-14-2008, 08:19 PM
Big TIres, Change Counter Sprocket Gear to a smaller one. Front tire OPtions are limited in a 4/130 bolt pattern. Could build a spacer and use a ITP 10 rim it has a 1 inch from center offset. If you go taller you will want to go wider aswell.

going to a 27" tire will put you up 2.5" at the axle and engine cradle.

SWIGIN
01-14-2008, 08:46 PM
i used a 4 on 130 front hub on my 110 and then used a q-sport 9 inch gold aluminium rear wheel.

just letting you know of another wheel option

i only had to open up the center hole to fit the honda hub

cajunchilipeper
01-14-2008, 09:21 PM
KK I am going to look around and explore my options....if there are any other options please let me know...thanks for all the help

McDerry
01-14-2008, 10:49 PM
If this part number is still good with Carlisle (AD16-7901) then that should be a 9x10 symmetrical rim in 4 on 150 4 on 130 pattern. This place list them so they may still have some stock. http://www.psep.biz/store/atv_wheel.htm

You could then run the Goodyear ATT912 in the front (25x11x9) and then run a aggressive 25x12-9 in the rear.

Rustytinhorn
01-15-2008, 05:18 AM
keep in eye peeled on ebay for front fork extenders, they move the front wheel 2 inches forward and a few inches taller, and then like mcderry said bigger tires, if you go mud tires you need to use a lite tire otherwise you'll kill that poor motor trying to turn over some huge meats


Here is what you want. There are the fork extenders on the front syko was talking about, and the taller tires on the back for to raise the rear. (You've probably seen this pic a hundred times, but I'm running short on pics right now. lol)

http://i242.photobucket.com/albums/ff54/rustytinhorn/BW2ATC200.jpg
http://i242.photobucket.com/albums/ff54/rustytinhorn/BWATC200.jpg

Bryan Raffa
01-15-2008, 09:01 AM
:eek: orange garbage bags!!!...I know what that means in NY!!:eek:

It's Called Work Release:lol: :lol: :lol: :lol:

cajunchilipeper
01-15-2008, 09:51 AM
lol...mayb just halloween......maybe.....
:eek: orange garbage bags!!!...I know what that means in NY!!:eek:

It's Called Work Release:lol: :lol: :lol: :lol:

Rustytinhorn
01-15-2008, 07:00 PM
:eek: orange garbage bags!!!...I know what that means in NY!!:eek:

It's Called Work Release:lol: :lol: :lol: :lol:

Got community service hours for riding my motorcycle down the hall at the High School.:twisted: :twisted: :twisted:

j/k. The county hands out the orange bags to the kids, and pays them for collecting Dyers Woad.
Haha, I take it you are well aquainted with them things...??? lol j/k Bryan

Bryan Raffa
01-15-2008, 07:02 PM
orange bags allways have something to do with the county...:lol: :lol: :D

Threes company
01-15-2008, 07:20 PM
j/k. The county hands out the orange bags to the kids, and pays them for collecting Dyers Woad.
Haha, I take it you are well aquainted with them things...??? lol j/k Bryan
OK Rusty........ you're going to have to fill us city slickers in on something... Dyers Woad????? :wondering :beer

Name Brand
01-15-2008, 10:54 PM
You could then run the Goodyear ATT912 in the front (25x11x9) and then run a aggressive 25x12-9 in the rear.


Hmmmm; sounds an awful lot like mine! :p

dansvan
01-15-2008, 11:43 PM
Did some one say lift?

http://i36.photobucket.com/albums/e12/KSToy1992/Jun07662.jpg

http://i36.photobucket.com/albums/e12/KSToy1992/Jun07661.jpg

cajunchilipeper
01-15-2008, 11:58 PM
Now thats redneck....
Did some one say lift?

http://i36.photobucket.com/albums/e12/KSToy1992/Jun07662.jpg

http://i36.photobucket.com/albums/e12/KSToy1992/Jun07661.jpg

cajunchilipeper
01-16-2008, 12:00 AM
also what is the size of the stock rims?????

Black86tri-z
01-16-2008, 12:02 AM
Did some one say lift?

http://i36.photobucket.com/albums/e12/KSToy1992/Jun07662.jpg

http://i36.photobucket.com/albums/e12/KSToy1992/Jun07661.jpg

please tell me that's yours and it runs and drives!!!!!!!!!!!!!!!!!!!!!!!!:w00t: :beer :D

Rustytinhorn
01-16-2008, 03:49 PM
OK Rusty........ you're going to have to fill us city slickers in on something... Dyers Woad????? :wondering :beer

Sorry, Dyers Woad is a very noxious weed that takes over everything out here in the West. It will take over pastures and mountain sides in a matter of years. Its kinda like getting super-sized dandilions in your lawn, except they don't go away.
Roots can be up to 5 feet in length and plants can officially be up to 4 feet tall, although I have seen some that push that limit.
The only practical way has been to pull-up every dyers woad weed by hand, roots and all. If you leave the roots they will grow back. The last couple of years they have developed a new spray that is only supposed to kill dyers woad, without harming your pasture. It seems to work good, but they should be sprayed a couple times a year.

Edit-They weigh a lot too.

http://i242.photobucket.com/albums/ff54/rustytinhorn/dyersWoad1.jpg

Rustytinhorn
01-16-2008, 03:54 PM
Did some one say lift?



That thing is sick!!!!! I'd hate to tip over backwards on it though...or any direction for that matter.

You should make that thing into a working swimgarm....:naughty:

cajunchilipeper
01-16-2008, 07:42 PM
what u mean it does work...lol.....needs a shock...n mayb some training wheels...lol...
That thing is sick!!!!! I'd hate to tip over backwards on it though...or any direction for that matter.

You should make that thing into a working swimgarm....:naughty:

Brockey
01-16-2008, 08:25 PM
WOW. I really dont think I'd be out in public on it. But I would like to see it be ridin'.

cr480r
01-16-2008, 09:07 PM
Did some one say lift?

http://i36.photobucket.com/albums/e12/KSToy1992/Jun07662.jpg


HAhaaahah... I can picture the slightest breeze blowing that thing over... That thing would be twice as cool with half the lift...

Tri-Z Pilot
01-16-2008, 09:15 PM
No, double that lift would be 3 times as cool:D
No seriously though he's probably the guy givin trikes a bad rap, lettin people ride it and tipping it while 60 minutes is around. lol

cajunchilipeper
01-17-2008, 12:19 AM
And the one making it seem that only rednecks still have 3 wheelers...and give rednecks a bad name...
No, double that lift would be 3 times as cool:D
No seriously though he's probably the guy givin trikes a bad rap, lettin people ride it and tipping it while 60 minutes is around. lol

Mr.Jake
01-17-2008, 12:53 AM
if someone drove that near me i'd likely tip the thing over and laugh

TwoHundredEx
01-17-2008, 01:59 AM
I'd be scared of the pull start kicking back causing me to fall to my death.
I like how he's still wearing rain boots too. Like he's gonna find water deep enough to get up to his feet. :lol: