Need some 85 250r parts named/identified

[Kintore]

hey guys,

Powdercoater didnt put parts back in the bags so theres these last ones I cant Identify.
Anyhelp?

Theres the 2 small round peices
C shaped threaded one
and the L peice???
http://i3.photobucket.com/albums/y92/JoshBall/P1150212.jpg
http://i3.photobucket.com/albums/y92/JoshBall/P1150215.jpg
http://i3.photobucket.com/albums/y92/JoshBall/P1150216.jpg
http://i3.photobucket.com/albums/y92/JoshBall/P1150217.jpg
http://i3.photobucket.com/albums/y92/JoshBall/P1150213.jpg

Thanks alot!
:welcome:

[ceaserthethird]

the C shaped is a Roller Bearing Holder ....

[Kintore]

Oh man, good call!

I shoulda known that!

[250rfan]

hey guys,

Powdercoater didnt put parts back in the bags so theres these last ones I cant Identify.
Anyhelp?

Theres the 2 small round peices
C shaped threaded one
and the L peice???
http://i3.photobucket.com/albums/y92/JoshBall/P1150212.jpg
http://i3.photobucket.com/albums/y92/JoshBall/P1150215.jpg
http://i3.photobucket.com/albums/y92/JoshBall/P1150216.jpg
http://i3.photobucket.com/albums/y92/JoshBall/P1150217.jpg
http://i3.photobucket.com/albums/y92/JoshBall/P1150213.jpg

Thanks alot!
:welcome:

Okay,

The 2 small round pieces are the swingarm bushes - they go either side of the needle bearings, you should have 4 of them - you dont need them pc,d.

The L piece is the upper chain slider, it bolts onto the outside of the frame, where your rear shock ressie is - the bolt goes through the slider then through the frame then through the ressie holder (detachable on the 86 model).

The C shaped piece is the upper chain roller also( should have a roller to go inside)goes to the right side of the ressie bracket,

Hope this helps.

[edog]

The flat metal and plastic peice is a chain gaurd.The o shaped things go on the swingarm bolt.

[Kintore]

Oh thanks alot guys!
I got Xsystem bushings so I shouldnt need them O shaped things?


Thanks alot guys, it all makes sense now!

[dizasterzrfun69]

Oh thanks alot guys!
I got Xsystem bushings so I shouldnt need them O shaped things?




Nope, and im almost 100% sure that if you buy new all-balls bearings they come with those "O-shaped Things"

[Kintore]

Sweet, thanks for all the help guys!

[Derrick Adams]

you guys sure those 2 round deals aren't the hard plastic bushings that go on the frame to guide the seat latch assembly?

[edog]

you guys sure those 2 round deals aren't the hard plastic bushings that go on the frame to guide the seat latch assembly?

Very shure......