split the cases today...

[Ryan.]

and ughh ya, so we were splinting the blasters cases and the crank just fell right out! and it looks like it was rubbing in the bottom of the cases also.....:wondering

looks like the seals were shot also...

[smokinwrench]

If the crank was rubbing the cases you need to keep looking something is worn. Crank bearings out, cases wallowed, or a previous failure?

[Ryan.]

If the crank was rubbing the cases you need to keep looking something is worn. Crank bearings out, cases wallowed, or a previous failure?

i think its the main bearings on the clutch side...

[Dirtcrasher]

I have 2 smoked Blaster engines here, that crank and rod take a BEATING!!