PDA

View Full Version : new 350x cam and rockers?


TECATEMATT
04-06-2008, 10:00 PM
dose anyone know where i could get a stock cam and a stock set of rockers for a 350x at a good price?
SWIGIN
04-07-2008, 05:43 PM
i have a nice stock cam i'll never use but im hanging onto it for a core for a aftermarket cam.

you might be able to talk me into selling it....lol
The Goat
04-07-2008, 07:55 PM
swigin...if you were to sell it for 60...you could get a new billet one. for the same price as a regrind. sad part is the regrind will outlast that brand new one...
Dirtcrasher
04-07-2008, 09:08 PM
dose anyone know where i could get a stock cam and a stock set of rockers for a 350x at a good price?


Are ya sure thats all ya need :naughty:??You didn't post your situation. Usually the 350X cam journals on the head are smoked and need to be changed with the cam and the rockers.

There have to be plenty of guys with good stock cams for a decent price or I believe the OEM is still available for about 150$. Either way, your not too far away from a mild Webcam and if you still have the old cam, it may cover your core charge. Unless it is too far gone................

Rockers are another thing, I've been told that to harden them for an aftermarket cam is about the same cost as new OEM rockers.
SWIGIN
04-08-2008, 05:19 PM
swigin...if you were to sell it for 60...you could get a new billet one. for the same price as a regrind. sad part is the regrind will outlast that brand new one...

i need the bearing cam so its a little more then you think...lol

and the regrind and the new billit are both hardned the same and last the same
The Goat
04-08-2008, 08:24 PM
yeah i sent mine off to megacycle, and i have a feeling they will be calling me any day now to tell me I'm going to have to go with the needle bearing cam in mine....
Dirtcrasher
04-08-2008, 08:30 PM
It's still gotta be better than paying for a good head that runs 250$ to 500$.... And you'll get a sweet cam to boot!
Erics350x
04-08-2008, 08:46 PM
I just saw a new cam on ebay with 0 bids.
SWIGIN
04-09-2008, 06:15 PM
It's still gotta be better than paying for a good head that runs 250$ to 500$.... And you'll get a sweet cam to boot!



yeah right.....specialy if your head is a ascott 500 head and you dont want to ever go through all the work to get another one to fit....lol
NOS_350X
04-09-2008, 06:49 PM
I got 2 or 3 stockers laying around here, gime what the core charge is at webcam and there yours.