Who runs the ESR Pipe and muffler on there 250R?

[edog]

I would like some feedback on this setup.What your running for a carb,jetting,plug,reeds,head work........

Thanks

[bingham]

im running the ESR with a 39 pwk, boyseen reeds. nothing done to motor really. runs very nice. cant remember the jetting on it either. I like it, was a little rough putting it on due to the mounting brackets not lining up perfect but its very nice.

[Mosh]

Well you Know Mrs.Mosh runs one on hers.
Ditto what Bingham said....They ARE a PITA to get fitted correctly.

The good points are, it is rugged,very thick walled and tough.We have some sort of aftermarket Silincer on hers.We were told it is a Bill's or Motofast.It bolted right to the silencer.I dont think ESR makes a silencer for the 2 fiddy.I could be wrong though.

Her mods are this,20 over jug,no porting,stock head PJ 36 mil carb from a 98 cr250
48 pilot,165 main and boyeson reeds.

It pulls very nice in the mid and wails on top.The bottom end lacks slightly.
Next to my ported 250R trike with a CR head gasket,PWK 38 mil carb and v-force 2 and DG pipe,She gets behind me on the starts,but will catch me and run with me.We both run the same gearing and tires and have plus 3 swingers.

I think besides a Paul Turner Hi -Rev,it is the best pipe hands down.
I think it is the toughest built pipe I have ever seen.

[deathman53]

Esr does make a silencer for it, atleast they did about 3 years ago.

[edog]

Well you Know Mrs.Mosh runs one on hers.
Ditto what Bingham said....They ARE a PITA to get fitted correctly.

The good points are, it is rugged,very thick walled and tough.We have some sort of aftermarket Silincer on hers.We were told it is a Bill's or Motofast.It bolted right to the silencer.I dont think ESR makes a silencer for the 2 fiddy.I could be wrong though.

Her mods are this,20 over jug,no porting,stock head PJ 36 mil carb from a 98 cr250
48 pilot,165 main and boyeson reeds.

It pulls very nice in the mid and wails on top.The bottom end lacks slightly.
Next to my ported 250R trike with a CR head gasket,PWK 38 mil carb and v-force 2 and DG pipe,She gets behind me on the starts,but will catch me and run with me.We both run the same gearing and tires and have plus 3 swingers.

I think besides a Paul Turner Hi -Rev,it is the best pipe hands down.
I think it is the toughest built pipe I have ever seen.

Here is the setup that I am looking at.
http://www.eddie-sanders-racing.com/oscmax/product_info.php?cPath=1_15_63&products_id=16
http://www.eddie-sanders-racing.com/oscmax/product_info.php?cPath=1_15_64&products_id=21