new grab bar and tail/brake light on my 86 Tecate

[oOGoFastOo]

Here is the 08 YFZ 450 grab bar and led tail/brake light i bought off ebay for $53.00 shipped to my house. i mounted it on my 86 Tecate, it looks trick and i hooked up the brake light also which is cool. the led is very bright and looks cool when not on. the first pic is it not on, the second is just the lights on, and the third is the brake light.

[Eric250R]

Awesome. What kind of fab work did it take to make it work ?

[oOGoFastOo]

i had to build 3/4in. spacers for each side of the frame and put the right connectors for the tail light and wire in a brake light switch for the foot brake to make brake light work. it was pretty easy and only took a couple hours.

[honda250sx]

Fabbed one up for my SX. Complete with rear foot brake switch and front master cylinder switch. Super bright taillights. I bought mine junk on ebay for a buck and warrantied it at the dealer i work at lol.

http://i71.photobucket.com/albums/i151/brauerpower/DSCN2996.jpg

[moose 53]

Looks good . Did you use a rectifier or hook it straight to your stator ? AC or DC current ? :Bounce

[oOGoFastOo]

it is a stock 1984 swingarm that i lengthened 8 inches which is only 6 inches over the stock 1986 swingarm, and it is running the stock 1986 suspension setup. here is a pic of just the swingarm.

[oOGoFastOo]

Looks good . Did you use a rectifier or hook it straight to your stator ? AC or DC current ?
i hooked it straight up to the origional wires and ran another wire for the brake light.

[oOGoFastOo]

because i dont have a TIG welder for aluminum yet. lol and i had the 84 laying around.